Key examples — fluid mechanics
Where the chapter’s machinery shows up across the bookshelf.
Example 1: Bernoulli at the threshold of cavitation
The pressure at the throat of a constriction drops by relative to the far field. When this drop is large enough to push the local pressure below the liquid’s vapour pressure, a vapour cavity nucleates — cavitation. The cavitation number measures how close the flow is to this threshold; cavitation occurs roughly when where is the most-negative pressure coefficient anywhere on the body. See Cavitation Ch 2.4.
Example 2: lubrication theory and the cochlear traveling wave
The basilar membrane sits in a thin fluid-filled gap of the cochlea (~1 mm wide, ~100 μm scale height). For long-wavelength pressure variations along the cochlea, the flow in the gap is approximately parallel to the membrane: , . This is the lubrication-theory limit. Navier–Stokes reduces to
which is exactly the long-wave hydrodynamic equation coupling membrane displacement and pressure that the Hearing book’s traveling-wave chapter develops. The whole tonotopic frequency-place map of the cochlea is a consequence of this lubrication-theory reduction applied to a membrane with a stiffness gradient.
Example 3: the Rayleigh–Plesset velocity field
For a spherical bubble of radius in an incompressible liquid, mass conservation in spherical coordinates gives , i.e. (matching the boundary condition ). Integrating the radial Euler equation from to gives the Rayleigh–Plesset equation. This is one of the cleanest deployments of continuity + Euler in spherical geometry. See Cavitation Ch 3.1.
Example 4: very-low-Re Stokes drag on a stereocilium
A single stereocilium of a hair-bundle has radius and moves at frequencies up to 20 kHz with displacements of a few nm. The Reynolds number is — deep in Stokes flow. The drag force per cilium is with , contributing to the damping of the basilar-membrane response. The hair-cell amplifier (Hearing Ch 4.5) is precisely the cell’s strategy for cancelling this viscous damping with an active feedback force.
Example 5: the four routes to the acoustic wave equation
The Sound book derives the acoustic wave equation four different ways: from fluid mechanics (continuity + Euler + adiabatic EOS), from a lattice of oscillators, from kinetic theory, and from Hamilton’s principle. The fluid-mechanics route (Sound Ch 4.5) is the one this chapter directly supports. Linearising continuity and Euler around a uniform rest state, with , , , gives
the acoustic wave equation, with from the adiabatic equation of state.
Cross-book backlinks
- Sound Ch 4.2 — conservation of mass: the continuity equation, slowly.
- Sound Ch 4.3 — Euler’s equation: F = ma on a slab.
- Sound Ch 4.5 — fluid-mechanics route to the wave equation: linearising continuity + Euler.
- Sound Ch 9 — moving media: the material-derivative version of acoustic propagation.
- Hearing Ch 4.3 — the cochlear traveling wave: lubrication-theory long-wave equation.
- Cavitation Ch 3.1 — Rayleigh–Plesset derivation: continuity + Euler in spherical symmetry.
- Cavitation Ch 2.4 — nucleation in flow: Bernoulli at the cavitation threshold.